Priming The Pumps; From The Unit; From The Formula Select - Brightwell Brightstar II Manual De Instrucciones

P P
RIMING
To prime the pumps from the Keypad, press the
display the Prime Mode screen.
UP DOWN
Use the and
to prime.
Press and hold the
pump.
UP DOWN
Use the and
wish to prime, and repeat as above.
Once all of the pumps have been primed, press the
to return the unit to service.
(The unit will return to service automatically if no keys are
pressed for 10 seconds)
Alternatively:
If the pumps are connected to a manifold then the FLUSH
VALVE PRIME may be enabled.
At the PRIME screen, press the
PRIME ENABLED" text will appear on screen and the allocated
flush valve will prime with the pump.
(Alternatively, press and hold the
prime all flush valves independently of the pumps)
Note:
This feature can be disabled from the TEST MODE (see page
44).
P P
RIMING
To Prime the Pumps from the Formula Select module, press
PRIME
and hold the
Module screen will display 'P1' (for pump 01).
UP DOWN
Use the and
number.
PRIME
Press and hold the
pump.
Note:
The module will return to normal if no keys are pressed for 5
seconds.
B L S
RIGHTSTAR AUNDRY YSTEMS
-
UMPS
F
ROM THE
keys to select the pump that you wish
PROGRAM
key to prime the selected
keys to select the next pump that you
TEST
key once, the "FV
TEST
key for 2 seconds to
-
UMPS
F
ROM THE
key for approximately 5 seconds. The
keys to select the required pump
key to prime the corresponding
U
NIT
PRIME
key to
00000
BRIGHTWELL
PRIME MODE
CHOOSE PUMP
PRIME
key
PRIME MODE
CHOOSE PUMP
PRIME MODE
CHOOSE PUMP
PRIME MODE
CHOOSE PUMP
FV PRIME ENABLED
00000
BRIGHTWELL
F S
ORMULA
39
BSL10 01
01
02
10
10
BSL10 01
ELECT
(5 seconds)
(5 seconds)
E
NGLISH
PRIME MODE
PRIMING PUMP
01
PRIME MODE
PRIMING PUMP
02
PRIME MODE
PRIMING PUMP
10 + Fv1
FV PRIME ENABLED
B L S
RIGHTSTAR AUNDRY YSTEMS