Setting Cooking Times & Power Levels; One-Stage Cooking; Multi-Stage Cooking; Using The More/Less Buttons - Maytag MMC5080AAS Manual Del Usaurio

Operation
Setting Cooking Times & Power Levels
Your microwave allows you to set up to two different stages of cooking, each
with its own time length and power level. The power level button lets you
control the heating intensity from Warm (1) to High (0).

One-stage Cooking

For simple one-stage cooking, you only need to set a cooking time. The
power level is automatically set to High. If you want to set the power to any
other level, you must set it using the
1
Use the number buttons to set a cooking time. You can set a time from
one second to 99 minutes, 99 seconds. To set a time over one minute,
enter the seconds too. For example, to set 20 minutes, enter 2, 0,
0, 0 .
2
If you want to set the power level to something other than High,
press the Power Level button, then use the number buttons to
enter a power level.
Power Levels:
1 = PL:10 (Warm)
2 = PL:20 (Low)
3 = PL:30 (Defrost)
4 = PL:40 (Medium Low)
5 = PL:50 (Medium)
3
Press the Start button to begin cooking. If you want to change the
power level, press Pause/Cancel before you press Start, and re-
enter all of the instructions.
Some recipes require different stages of cooking at different temperatures.
You can set multiple stages of cooking with your microwave.

Multi-stage Cooking

1
Follow steps 1 and 2 in the "One-Stage Cooking" section on the
previous page.
When entering more than one cooking stage, the
must be pressed before the second cooking stage can be entered.
To set the power level at High for a stage of cooking, press the
Level
button twice.
2
Use the number buttons to set a second cooking time.
3
Press the Power Level button, then use the number buttons to set
the power level of the second stage of cooking.
4
Press Start to begin cooking.
You can check the Power Level while cooking is in progress by pressing the
Power Level
button.
Power Level
button.
6 = PL:60 (Simmer)
7 = PL:70 (Medium High)
8 = PL:80 (Reheat)
9 = PL:90 (Sauté)
0 = PL:Hi (High)
Power Level

Using the More/Less Buttons

The More/Less buttons allow you to adjust pre-set cooking times. They only
work in the Instant, Time Cook modes
after you have already begun cooking with one of these procedures.
The More/Less feature cannot be used with the
1
To ADD more time to an automatic cooking procedure: Press the
More
(9) button.
2
To REDUCE the time of an automatic cooking procedure: Press the
Less(1) button.
If you wish to increase/decrease in
the More(9) or Less(1) button.

Switching the Beeper On/Off

You can switch the beeper off whenever you want.
1
Press the Sound
("START" will flash)
2
Press the Sound button to turn the volume off. The display shows:
"OFF".("START" will flash)
3
Press Start.
The display returns to the time of day.
button
Power
10
. Use the More/Less button only
Sensor Cook
Time Cook mode
button. The display shows "ON".
button.
by 10 sec, press