Warnings And Precautions - Corradi KEV Manual Del Usuario

WarnInGS anD PrECautIonS

PrELIMInarY ChECKS
When you receive the packaged goods, if assembly is not to be carried out by the dealer, check that
all materials are intact and that no parts are missing.
If you should have any problems, contact the authorised dealer.
DISPoSaL of PaCKaGInG MatErIaLS
Divide the various packaging according to the material used (cardboard, nylon, polystyrene etc.)
and dispose of them separately in compliance with the regulations in force.
GEnEraL WarnInGS
Before undertaking any assembly, maintenance or cleaning operations, make sure that you have
fully understood the indications in this manual.
All Corradi SpA products have a specific function described in this manual. Any other use not
envisaged here, the use of non-original components, or any unauthorised tampering and/
or technical modification, relieves Corradi SpA of any liability for harm to persons or animals, or
damage to objects resulting from such intervention.
Installers must have specific expertise as well as the aptitude and the physical and mental
requirements to be able to carry out their tasks; they must also respect the safety regulations in
force.
18
SafEtY PrECautIonS
It is good practice to bear in mind that any moving component can constitute a hazard.
Power must always be off (in the motorised model) during product maintenance, repairs or
adjustments. A warning sign should also be posted on the main power switch with the following
message:
"DO NOT TOUCH: work in progress".
Check that no one is near the awning before turning it on again after maintenance work. After
maintenance, always make sure that manual and electric drives are properly assembled and that
they work correctly; should you encounter any problems stop the awning immediately and contact
Corradi SpÀs technical assistance department.
DEMoLItIon
At the end of the product's lifetime, plastic parts must be separated and taken to an appropriate
recycling centre according to current regulations.
Metal parts should be divided up into stainless steel and other non-ferrous metals or alloys, for
correct recycling.
CORRADI SPA - USER MANUAL - KEV Rev. 0/2014