To Set The Location; To Set The Fax Header - HP LaserJet 300 Manual De Instrucciones

6
7

To set the location

The location setting identifies the country/region where the MFP/fax
accessory is located. This setting also sets the date/time format
and minimum/maximum rings-to-answer range for the country/region.
Because this setting is a legal requirement in some countries/regions,
it must be set for the fax accessory to operate. If this is the first time
you are powering up the printer, you will be prompted for this
information.
To verify or change the location, complete the following steps.
1
2
3
4
5
6
For Slovenia set the location to Hungary or Poland. For Morocco set
Note
the location setting to Spain.

To set the fax header

The fax header setting is used to set a phone number and company
name that are placed in the fax header. This information is required
and must be set.
To verify or change the phone number and the company name,
complete the following steps.
1
2
3
4
5
ENWW
Select the time format and then enter the time.
Touch OK to accept the settings.
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Touch FAX SETUP REQUIRED to display the required settings
menu.
Touch FAX HEADER to display the header settings.
Touch LOCATION to display the list of countries/regions.
Scroll through the list until your country/region is displayed, and
then touch the country/region to select it.
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Touch FAX SETUP REQUIRED to display the required settings
menu.
Touch FAX HEADER to display the settings.
Touch PHONE NUMBER to display the keyboard.
Making required fax settings 13