Setting Rings-To-Answer; Stamp Received Faxes (Incoming Faxes) - HP LaserJet 300 Manual De Instrucciones

Setting rings-to-answer

The rings-to-answer setting determines the number of times the
phone rings before the call is answered by the fax accessory.
To set the number of rings-to-answer, perform the following steps.
1
2
3
4
5
The default setting range for rings-to-answer is country/region specific.
Note

Stamp received faxes (incoming faxes)

The stamp received faxes setting enables or disables stamping
incoming faxes. The stamp prints the date, time, phone number
and page number, on each incoming page.
To enable or disable stamp, perform the following steps.
1
2
3
4
5
42 Chapter 3 Configuration
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Scroll down and touch FAX RECEIVE.
Touch RINGS TO ANSWER to display the rings-to-answer
screen.
Use the up and down arrows to select the number of rings, and
then touch OK.
On the control panel, press the Menu button to display the
main menu.
Touch FAX to display the fax menu.
Scroll down and touch FAX RECEIVE to display the Fax Receive
setting.
Scroll down and touch STAMP RECEIVED FAXES to display the
settings.
Touch NO (default) to disable the stamp, or touch YES to enable
the stamp.
ENWW