Master Forge GR2045401-MF-00 Manual Del Usuario página 25

To purge air from your gas line and/or reset the regulator excess gas flow device:
Turn Control Knobs to the OFF position.
Turn off the gas at the tank valve.
Disconnect regulator from LP Gas tank.
Let unit stand 5 minutes to allow air to purge.
Reconnect regulator to the LP Gas tank.
Open the Grill Lids.
Turn tank valve on SLOWLY 1/4 of a turn.
Push and turn the middle Control Knob farthest from open tank to HIGH
Press Electric Igniter for 3-4 seconds to light the burners.
WARNING
Should a FLASHBACK fire occur at or around the Burner Tubes, follow the instructions
below. Failure to comply with these instructions could result in a fire or explosion that
could cause serious bodily injury, death, or property damage.
Shut off gas supply to the gas grill.
Turn the Control Knobs to OFF position.
Open the Grill Lids.
Put out any flame with a Class B fire extinguisher.
Once the grill has cooled down, clean the Burner Tubes according to the cleaning
instructions in this Operator's Manual.
WARNING
Failure to comply with these instructions could result in a fire or explosion that could
cause serious bodily injury, death or property damage.
Keep grill area clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
Do not obstruct the flow of air for combustion and ventilation.
Keep the ventilation openings of the tank enclosure cabinet free and clear of debris.
GR2045401-MF-00 / GR2045402-MF-00
25
20121205