Description Of The Unit - ProMed 1030 Instrucciones De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
D
esCrIPtIon oF the unIt
Please read the user manual thoroughly before using the appliance for the first time.
Many thanks for purchasing the Promed 1030 manicure device. This device was especially
designed and manufactured to ensure the quality of treatment and may be used by both
qualified personnel and private individuals after reading these instructions. This device is only
suitable for manicure use (e.g. cuticle care, nail care, etc.). The device is also suitable for
working in the field of nail technique and nail design as well as handling all materials used in
this field such as gel and acrylic.
We, as the manufacturer, cannot be made liable in any way for injury or damages to people
or objects that arise from failure to comply with this warning.
We wish you a lot of enjoyment with your new Promed 1030 unit. We would like to
familiarize you with the unit in the following sections. Please read the user manual thoroughly
before using the unit for the first time.
Note:
Please maintain a distance of 2 - 3 mm between the tip of the hand piece and the abrasive wheel.
2-3 mm
The rotational speed must be reduced to zero before changing the abrasive wheel.
The device switches itself off in the event of non-compliance (SAFETY STOP).
Changing the abrasive wheel
1. Turn the clamping device (L) to the left. It must audibly click / snap into place two (2) times.
The collet opens.
2. The abrasive wheel can be changed.
3. Afterwards, turn the clamping device (L) to the right. It must audibly click / snap into place
two (2) times. The collet closes and thereby secures the abrasive wheel. Start the
device again for operation.
1
Please keep this user manual in a safe place!
2
3
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI

Publicidad

Tabla de contenido
loading

Tabla de contenido