Appendix A - Pressure Transducer Data - ITT Goulds Pumps AquaBoost 1AB1 Instalación, Operación Y Mantenimiento

Appendix A
Pressure Transducer
The sensor of this transducer is a piezoresistive silicon pressure sensor, mounted on a tape (TAP) fl oating
freely in an oil chamber. The pressure is transferred to the sensor by a separating nickel diaphragm in
the oil chamber.
Specifi cations
Range (FS):
Over-pressure-Pmax:
Class of protection:
Type
Signal Over Range:
Supply:
Supply:
Operating Temperature:
Storage Temperature:
Material:
Diaphragm:
10 Bar (147 psi) Gauge
300 psi
IP 67
Sealed gauge:
0.5 - 4.5 V DC (ratiometric)
5 VDC +/- 0.25 VDC
+ VCC => red = supply voltage
+ Out => white analog output signal
GND => black ground
-20 - +80°C
-40 - +100°C
Body Steel and Brass
Nickel
1 ⁄ " NPT THREAD
4
Pressure Transducer
+ out (0.5 – 4.5 V)
+FCC (5VDC)
Plug
11
GND