Installation Confi Guration; Electrical Connections - ITT Goulds Pumps AquaBoost 1AB1 Instalación, Operación Y Mantenimiento

Installation Procedures
Installation Confi guration
Step 2 – Electrical Connections
WARNING!
WARNING
FAILURE TO DISCONNECT AND LOCKOUT ELECTRICAL POWER AND WAIT FIVE MINUTES
FOR CAPACITOR DISCHARGE BEFORE SERVICING AQUABOOST CONTROLLER CAN CAUSE
SHOCK, BURNS, OR DEATH.
Hazardous voltage
can shock, burn or
cause death.
Note
Installation and maintenance must only be performed by properly trained and qualifi ed person-
nel equipped with the proper tools.
WARNING!
WARNING
INSTALL, GROUND AND WIRE ACCORDING TO NATIONAL, STATE AND LOCAL CODE
REQUIREMENTS.
INSTALL AN ALL LEG DISCONNECT SWITCH NEAR THE MOTOR.
Hazardous voltage
can shock, burn or
cause death.
DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE INSTALLING OR SERVICING.
ELECTRICAL SUPPLY MUST MATCH PUMP'S AND AQUABOOST CONTROLLER NAMEPLATE
SPECIFICATIONS. INCORRECT VOLTAGE OR WIRING CAN CAUSE FIRE DAMAGE, AND VOIDS
WARRANTY.
MOTORS WITH AUTOMATIC THERMAL PROTECTION MAY OPEN THEIR ELECTRICAL CIRCUIT
WHEN A THERMAL OVERLOAD EXISTS. THIS CAN CAUSE THE MOTOR TO START UNEXPECT-
EDLY AND WITHOUT WARNING.
AquaBoost
Controller
230V, 1Ø
Tank
Input
230V, 3Ø
Output
Thermistor
Diagram 5
6
Transducer
Gauge
Discharge
to house
Suction
from main