Getting Started Unpacking; Serial No. / Batch Code - Evolution R185SMS Instrucciones Originales

Ampere Rating
More Than Less Than
0 6
6 10
10 12
12 16
10. Wear proper apparel do not wear loose
clothing, gloves, neckties, rings, bracelets, or other
jewellery which may get caught in moving parts.
Nonslip footwear is recommended. Wear protective
hair covering to contain long hair.
11. Always use safety glasses. Also use face or
dust mask if cutting operation is dusty. Everyday
eyeglasses only have impact resistant lenses, they
are not safety glasses.
12. Secure work. Use clamps or a vise to hold work
when practical. It' s safer than using your hand and it
frees both hands to operate tool.
13. Don't overreach. Keep proper footing and
balance at all times.
14. Maintain tools with care. Keep tools
sharp and clean for best and safest performance.
Follow instructions for lubricating and
changing accessories.
15. Disconnect tools before servicing; when
changing accessories, such as blades, bits, cutters,
and the like.
16. Reduce the risk of unintentional stating. Make
sure switch is in off position before plugging in.
17. Use recommended accessories. Consult the
owner's manual for recommended accessories.
The use of improper accessories may cause risk of
injury to persons.
18. Never stand on the tool serious injury could
occur if the tool is tipped or if the cutting tool is
unintentionally contacted.
19. Check damaged parts. Before further use
of the tool, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function
- check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation.
A guard or other part that is damaged should be
properly repaired or replaced.
Volts Total length of cord in feet
120 25
AWG
18
18
16
14
20. Direction of feed. Feed work into a blade or
cutter against the direction of rotation of the blade
or cutter only.
21. Never leave tool running unattended. Turn
power off. Don't leave the tool until it comes to a
complete stop.
GETTING STARTED - UNPACKING
(4.1)
Caution: This packaging contains sharp objects.
Take care when unpacking. This machine could
require two persons to lift, assemble and move this
machine. Remove the machine, together with the
accessories supplied from the packaging.
Check carefully to ensure that the machine is in
good condition and account for all the accessories
listed in this manual. Also make sure that all the
accessories are complete.
If any parts are found to be missing, the machine
and its accessories should be returned together in
their original packaging to the retailer.
Do not throw the packaging away; keep it safe
throughout the warranty period. Dispose of
the packaging in an environmentally
responsible manner. Recycle if possible. Do not let
children play with empty plastic bags due to the
risk of suffocation.

SERIAL NO. / BATCH CODE

The serial number can
be found on the motor
housing of the machine.
For instructions on how
to identify the batch
code, please contact the
Evolution Power Tools
helpline or go to:
www.evolutionpowertools.com
12
www.evolutionpowertools.com
50 100 150
16 16 14
16 14 12
16 14 12
12 Not Recommended