Safety And Installation - Leroy-Somer Unimotor fm Seguridad Y Instalación

LEROY-SOMER
Sécurité et installation - Safety and installation - Sicherheit und installation -
Seguridad y instalación - Sicurezza e installazione

2 - SAFETY AND INSTALLATION

SAFETY
Unimotor fm and Unimotor hd motors
have been designed to be operated with
LEROY-SOMER drives, such as Unidrive
SP and Digitax ST. They must not be put
into service within the European Union
unless the machinery into which it is
to be incorporated has been declared
in conformity with the provisions of the
machinery directive.
Before you install or service the servo
motor you should be properly trained and
qualified to do so.
Unimotors built to customer specification
Motors are frequently supplied customised
to suit individual customer requirements.
Design changes to motors specified by the
customer will change the working limits
and specification of the motor, and may
affect the mechanical or electrical safety
integrity. These changes are deemed to be
acceptable and approved by the customer.
The customer takes ultimate responsibility
to ensure the safety integrity of his
machine, the components and specification
of components fitted therein.
14
Keep hands and clothing
clear of rotating parts.
!
Secure motors correctly
before operating.
Motors can run hot.
CAUTION
Incorrect drive setup can
destroy the motor.
If you want to run a keyed motor with
no coupling fitted, then to reduce risk
of injury, remove or tape the output key
first.
DO NOT fit or remove cables while the
drive is powered on.
TRANSPORTATION
All servo motors have been tested and
inspected before leaving the factory and
are packed in prefect condition. When you
receive the motor, please check it for any
external damage it may have received
in transit. If you see anything wrong write
out a damage notification statement in the
presence of the carrier.
STORAGE
Store the motor only in an enclosed, dry,
ventilated and vibration free place within
temperature limits -15°C to 40°C. Any
damage caused by incorrect storage or
handling is not covered by the defects
warranty.
4100 - 2011.02 / b