VWR shiroGEL Vertical 20 Manual De Instrucciones página 17

4. Once the green sliding gel clamp is removed
the PAGE insert is ready to accept the
thinner yellow sliding gel clamps for 2-gel
sandwiches, either side of the PAGE insert,
to convert the shiroGEL VERTICAL 20 to a
4-gel configuration.
5. Insert the yellow sliding gel clamp into the
hole closest to the core of the PAGE insert.
Once inserted gently withdraw the sliding
clamp outwards away from the core of the
PAGE insert as shown.
6. Withdraw the sliding gel clamps so that they
sit suspended in the resting slots as shown.
Repeat steps 1-6 to replace the remaining
green sliding gel clamps. Once complete
the PAGE insert is ready for 4-gel assembly.
14