Start / Stop - Saving The Measurements - WEBTEC HPM4000 Serie Manual Del Usuario

Instrument settings
4.7 StaRt / StOP – saving the measurements
This instrument can only save one measurement set in internal memory. The measurement set is overwritten when a new meas-
urement starts.
Use a USB flash drive in order to save multiple measurement sets.
If a USB flash drive is inserted before the instrumented is turned on, then the measurement saved internally will be transferred
to the flash drive.
The display then reads:
cautIOn
Only insert or remove the flash drive while the instrument is turned off.
38 V1.0/02/12