Technical Data - WEBTEC HPM4000 Serie Manual Del Usuario

technical data

8. Technical data
Version HPM4020
analogue version
Inputs Sensor inputs:
Measurement accuracy:
Plug connector:
Polling rate for P-channel: 1 ms
Interfaces USB device:
USB host:
Memory Internal memory for measurement data:
USB flash drive: 1 GB included
Functions Difference; addition; power;
ACT; MIN; MAX; FS; TEMP display;
Battery status
Start-stop measurement
46
Two analogue sensors with sen-
sor ID
≤0.2 % FS ± 1 digit
5-pole, Push-Pull
Online data transmission between instrument and PC via HPMComm software
Measurement transmissions: ACT/MIN/MAX, min. 5 ms
USB standard: 2.0, full speed
Plug connection: Micro-USB connector, shielded, Type B
Port for USB flash drive (max. 4 GB)
Recommended types: Delock USB 2.0 Nano flash drive, Intenso Micro Line
USB standard: 2.0, full speed,100 mA max.
Plug connection: Micro-USB socket, shielded, type A
1 measurement, about 15,000 records (270,000 readings for
ACT/MIN/MAX)
HPM4030
can version
Sensor inputs: CAN-bus interface for up to three
CAN BUS Webtec sensors with
sensor ID
Measurement accuracy: -
Plug connector: 5-pole, M12x1,
SPEEDCON
Polling rate for P-channel: 1 ms
®
, plug
V1.0/02/12