Industry Canada Certification; If Your Telephone Is Not Working Properly - Gigaset 5040 Guia De Inicio Rapido

Appendix
Care
To clean, wipe with a moist or antistatic cloth only, never
with a dry cloth (risk of electrostatic charging and
discharge) or harsh cleaning agent.

If your telephone is not working properly

No signal tone: The tone volume might be set to 0.
Lift handset, no dialing tone: Is the connecting lead
correctly plugged into the telephone and the telephone
socket?
Dialing tone audible but telephone will not dial:
The connection is OK. Is the dialing mode set correctly
(see page 10)?
PABX only: No connection or incorrect connection
when dialing from memory (e.g. redial, speed dial):
Program external line prefix.
The other party cannot hear you: Have you pressed
the Mute key? Press the
from the handset cord inserted correctly?
The Power on symbol flashes: The power adapter is
not connected correctly.
Flash key does not work: Set appropriate flash time.
The caller's phone number and the Calls list are not
displayed:
Is the adapter connected (see page 5)?
Can Calling Line Identification be used (see page 10)?
Contacts
If you encounter any problems when operating the tele-
phone connected to a communication system with
analog network access, please contact the Customer
Care Service.
J
key again. Is the plug
13
en

Industry Canada Certification

Operation is subject to the following two conditions (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
NOTICE: The Industry Canada label identifies certified equip-
ment. This certification means that the equipment meets cer-
tain telecommunications network, protective, operational and
safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements document(s). The Depart-
ment does not guarantee the equipment will operate to the
user's satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local tele-
communications company. The equipment must also be
installed using an acceptable method of connection. The cus-
tomer should be aware that compliance with the above condi-
tions may not prevent degradation of service in some situa-
tions.
Repairs to certified equipment should be coordinated by a rep-
resentative designated by the supplier. Any repairs or alter-
ations made by the user to this equipment, or equipment mal-
functions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together.
This precaution may be particularly important in rural areas
NOTE: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspec-
tion authority, or electrician, as appropriate.
This product meets the applicable Industry Canada technical
specifications.
The Ringer Equivalence Number is an indication of the maxi-
mum number of devices allowed to be connected to a tele-
phone interface. The termination of an interface may consist of
any combination of devices subject only to the requirement
that the sum of the RENs of all devices does not exceed five.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.