Bimar FFFRoid VR20 Manual De Instrucciones página 11

• If the electric cord is damaged, it has to be replaced by the supplier
or an authorized service center or a professionally qualified, to
avoid any risks.
• Do not use the appliance with a timer or a programmer or with a
system that can switch on the appliance automatically, to avoid
risk of fire, since a fire risk exists if the heater is covered or
positioned incorrectly.
• In the event of a breakdown or poor operation, turn the fan heater
off and ask for professionally qualified help: repairs made by
unqualified persons can be dangerous and render void the
warranty.
INSTALLATION
• After removing the packing materials, check the integrity of the appliance; if you
are unsure, do not use it and ask for qualified professional help. The packing
materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach
of children because they are potential sources of danger. Attention: any stickers
or advertising material applied to the grid removed before using the appliance.
The manufacturer declines all responsibility in case this is not safe working
practices will be respected.
• Before connecting the appliance, check that the voltage values shown on the data
plate correspond to those of the electricity supply network, and that the electric
plug is grounded. In the event of incompatibility between the electric outlet and
the plug of the heater, have the outlet replaced with another more suitable type
by professionally qualified personnel, who will make sure that the section of the
wires of the outlet is appropriate for the absorbed power of the heater. In
general, the use of adapters or extension cords is not recommended; if their use
is indispensable, they must conform to existing safety standards and their current
capacity (amperes) must not be less that the maximum of the appliance.
• The power socket must be easy to reach so the plug can be removed quickly in
case of emergency.
• To not place the appliance near sinks or other container of liquids (minimum
distance of 2 meters) to avoid the risk of it falling in.
• Do not place the appliance near an open flame, cooking or other heating
appliance.
• Keep the fan far away from fabrics (curtains, etc.) or unstable materials that
could obstruct the air intake grille; make sure that the front is free of unstable
materials (dust, etc.).
• The appliance requires no installation, i.e., the preparation of electrical and water
connections, fastening or anything else, for its use.
• Make sure that the electric cord is not touching rough, hot or moving surfaces
and not twisted or wrapped around the appliance.
ASSEMBLY
Attention: always unplug the appliance before you assemble, and insert the water
inside the tank.
The package contains:
11/41