Manuales relacionados para Sanus VLF320
Resumen de contenidos para Sanus VLF320
- Página 1 VLF 320 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 (UK: 0800-056-2853) We’re ready to help! Scan for easy install video http://san.us/725...
- Página 2 Does your TV weigh more than 120 lb (54 kg) including accessories? 120 lb No — Perfect! (54 kg) Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. What is your wall made of? Drywall with Solid concrete or...
- Página 3 Dimensions 1.61 40.9 2.00 [mm] 50.8 11.81 299.9 20.80 528.3 16.00 0.34 406.4 16.00 406.4 24.00 609.6 MIN 4.62 - MAX 30.62 6.40° 777.8 1.76 44.7 WALL 20.39 16.54 PLATE 518.0 420.0 BRACKET 0.43 11.0 1.50 ROLL CONTROL 32.16 816.9...
- Página 4 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
- Página 5 Parts and Hardware for STEP 2 Wall Plate Template Wall Plate Washers Lag Bolts Anchors 5/16 x 2 3/4 in. 5/16 in.
- Página 6 Parts and Hardware for STEP 3 Arm Assembly Wall Plate– Felt Pads Wall Plate Covers Arm Assembly Screws 1/4 20 x 1/2 in. Hex Keys Click Caps TV Bracket–Click Cap Screws 5/32 in. M4 x 30mm Parts and Hardware for Cable Management Cable Cover Screws Cable Cover Hex Key...
- Página 7 STEP 1 Attach Brackets to TV 1-1 Select TV Screws 1-2 Select TV Spacers Hand thread screws into the threaded inserts on the back of your TV Spacers and screws are supplied to install your TV bracket. to determine which screw diameter (M4, M6, or M8) to use.
- Página 8 1-3 Attach Spacers to TV Brackets NOTE: Skip this step if your TV has a flat back AND you want your TV closer to the wall. Press the four shoulder washers through the openings of TV brackets that line up with your TV hole pattern. Snap the four spacers you selected in STEP 1-2, onto shoulder washers...
- Página 9 1-4 Attach TV Brackets to TV Center the TV brackets over your TV hole pattern as shown, making sure the brackets are level with each other. Install using the screw and washer combination [a] or [b] you selected for your TV. NOTE: Use washer for screws Flat Back...
- Página 10 Stud centers must be verified – not all walls have conventional 16 in. (406 mm) stud spacing. Verify the center of the stud(s) using an awl, a thin nail, or an edge to edge stud finder. Level the wall plate template and mark the four hole locations. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. Min. 16 in. Max. (406 mm) 5/8 in.
- Página 11 Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT : Pilot holes must be drilled to a depth of 3 in. (75 mm). Install the four washers and lag bolts . Tighten all four lag bolts only until the washers are pulled firmly against the wall plate CAUTION:...
- Página 12 Level the wall plate and mark the four hole locations. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill four pilot holes using a 3/8 in. (10 mm) diameter drill bit.
- Página 13 Insert four anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install the four washers and lag bolts . Tighten all four lag bolts only until the washers are pulled firmly against the wall plate CAUTION: Improper use could reduce the holding power of the lag bolts .
- Página 14 STEP 3 Attach TV to Wall Plate 3-1 Attach Arm Assembly to Wall Plate NOTE: Arm assembly can be adjusted side-to-side to customize your TV installation. Align four holes at the top and four at the bottom of arm assembly to the slots in the wall plate Secure the top portion of arm assembly to the wall plate...
- Página 15 3-2 Hang TV onto Arm Assembly HEAVY ! You may need assistance with this step. Hook the TV brackets onto the arm assembly , as shown. Attach click caps to TV brackets with screws using hex key CAUTION: Avoid potential personal injury or property damage! Screws must be installed to secure the TV onto the arm assembly...
- Página 16 3-3 Apply Protective Felt Pads 3-4 Attach Wall Plate Covers Attach wall plate covers onto wall plate Affix self-adhesive felt pads onto the arm assembly to protect your wall.
- Página 17 Manage Cables Thread your TV cables through the channels in the middle and lower branches of the arm assembly Attach cable covers to the arm assembly . Secure with screw using hex key Route cable ties through the tie holders...
- Página 18 Adjustments LEVEL TILT Loosen the level screw using hex key Your TV should adjust easily when moved, then stay in place. adjust your TV, then tighten the level screw Adjust the tilt tension knob if your TV naturally tilts up or down. NOTE: If you do not intend to adjust the tilt for different viewing locations, you can tighten the tilt tension knob to prevent unwanted movement.
- Página 19 TV LATERAL SHIFT REMOVING THE TV HEAVY ! You may need HEAVY ! You may need assistance with this step. assistance with this step. Remove the TV by reversing the procedure in STEP 3-2 on PAGE 15. Remove the TV by reversing the procedure in STEP 3-2 on PAGE 15.
-
Página 20: Listo Para Comenzar
¿Su televisor pesa más de 54 kg (120 lb) incluyendo los accesorios? No — ¡Perfecto! 54 kg (120 lb) Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿De qué está hecha su pared? Tabiques de yeso con Hormigón sólido o... - Página 21 ESPAÑOL Piezas y elementos de sujeción Ver PÁGINA ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase en contacto con el servicio de atención al cliente.
-
Página 22: Opción Para Montantes De Madera
NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cuatro orificios guía con una mecha de 5,5 mm (7/32") de diámetro. - Página 23 Nivele la placa mural y marque las ubicaciones de los cuatro orificios. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cuatro orificios guía con una mecha de 10 mm (3/8") de diámetro.
-
Página 24: Organizar Los Cables
ESPAÑOL 3-2 Cuelgue el televisor en el módulo del brazo ¡ELEMENTO PESADO ! Es posible que necesite ayuda en este paso. Asegúrese de enganchar los soportes del televisor en la placa de conexión, como se muestra en la ilustración. Fije las tapas a la placa de conexión utilizando los tornillos . - Página 25 ESPAÑOL Ajustes Ver PÁGINA NIVEL Afloje el tornillo de nivel L utilizando la llave hexagonal , ajuste su televisor y vuelva a ajustar el tornillo de nivel L . INCLINACIÓN El televisor debe acomodarse fácilmente al moverlo y, posteriormente, quedar en su lugar. Si el televisor se inclina hacia arriba o hacia abajo de forma natural, ajuste la perilla de tensión de inclinación K a mano.
- Página 28 Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Like us on Facebook.com /sanussystems Follow us on Twitter: @ sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.