Manuales relacionados para Sanus VLT35
Resumen de contenidos para Sanus VLT35
- Página 1 VLT 35 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! Scan for easy install video http://san.us/657...
- Página 2 Does your TV weigh No — Perfect! more than 175 lb 175 lb (79.4 kg) including Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call (79.4 kg) accessories? 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. What is your...
- Página 3 Dimensions [mm] 32.881 835.18 24.875 631.82 10° 1.503 3.098 2.000 38.18 78.69 50.80 2.000 50.80 11.639 295.63 8.635 219.34 8°...
- Página 4 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
- Página 5 Parts and Hardware for STEP 2 Hardware for Adjustments Anchors (Concrete) Wall Plate Hex Key 3/16 in. Washers 5/16 in. Lag Bolts 5/16 x 2 1/2 in. Parts and Hardware for Optional Accessory Bracket Mounting Bracket Cage Nut Washers Screw Hex Key 1/8 in.
- Página 6 STEP 1 Attach Brackets to TV 1-1 Select TV Screws 1-2 Select TV Spacers Hand thread screws into the threaded inserts on the back of your TV Spacers and screws are supplied to install your TV bracket. to determine which screw diameter (M4, M5, M6, or M8) to use.
- Página 7 1-3 Attach Spacers to TV Brackets Press the shoulder washers through the openings of TV brackets that line up with your TV hole pattern. Snap shoulder washers into the spacers you selected in STEP 1-2.
- Página 8 1-4 Prepare TV Brackets (ONLY For TV Hole Patterns Wider than 600mm) NOTE: For TV's with hole patterns wider than 600 mm (≈23 5/8 in.), the placement of TV brackets must be reversed on your TV to fit your pattern and still allow hanging onto wall plate .
- Página 9 1-5 Attach TV Brackets Center the TV brackets over your TV hole pattern as shown, making sure the brackets are level with each other. IMPORTANT : Install with tilt tension knobs toward the outside. Install using the screw and washer combination you selected for your TV.
- Página 10 Stud centers must be verified – not all walls have conventional 16 in. (406 mm) stud spacing. Verify the center of the stud(s) using an awl, a thin nail, or an edge to edge stud finder. Level the wall plate and mark the hole locations. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. Min. 16 in. Max. (406 mm) 5/8 in.
- Página 11 Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT : Pilot holes must be drilled to a depth of 2 ½ in. (63 mm). Install the four washers and lag bolts . Tighten all four lag bolts only until the washers are pulled firmly against the wall plate CAUTION:...
- Página 12 Level the wall plate and mark the six hole locations. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill six pilot holes using a 1/2 in. (13 mm) diameter drill bit.
- Página 13 Insert six anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Install the six washers and lag bolts . Tighten all six lag bolts only until the washers are pulled firmly against the wall plate CAUTION: Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate...
- Página 14 OPTIONAL ClickFit Accessory Bracket Mounting ™ NOTE: If not installing this option, Skip to STEP 3 on PAGE 16. CAUTION: The ClickFit™ Surge Protector Mounting Accessory supports a maximum weight of 3 lb (1.3 kg). Cage Nut Assembly Option Pinch the ends of cage nuts and insert into brackets , then press brackets into the channels on wall plate...
- Página 15 Screw Assembly Option Secure brackets onto your accessory with washers and screws using hex key Press brackets into the channels on wall plate...
- Página 16 STEP 3 Attach TV to Wall Plate HEAVY ! You may need assistance with this step. Hang the TV onto wall plate by hooking the tops of TV brackets Gently rest the TV onto wall plate . An audible click ensures the TV is in the locked position. CAUTION : Avoid potential injuries or property damage! The ClickStand™...
- Página 17 Manage Cables Tighten the tilt adjustment knobs with hex key CAUTION : Avoid potential injuries or property damage! Tilt adjustment knobs must be tight when the TV is in the wiring position. Release the ClickStand™ on both TV brackets...
- Página 18 Pull the TV away from the wall enough to extend each ClickStand™ Rest the onto wall plate and connect all cables to your TV.
- Página 19 Lift the TV enough to lower the ClickStand™ on both TV brackets Gently rest the TV onto wall plate . An audible click ensures the TV is in the locked position. CAUTION : Avoid potential injuries or property damage! The ClickStand™ on both TV brackets , must be locked onto...
- Página 20 Adjustments LEVEL TILT Your TV should adjust easily when moved, then stay in place. To level your TV, use hex key to turn the level screw on the top of either TV bracket to raise or lower Adjust the tilt tension knobs if your TV naturally tilts up or down.
- Página 21 TV LATERAL SHIFT REMOVING THE TV HEAVY HEAVY ! You may need ! You may need assistance with this step. assistance with this step. Slide the TV left or right along the wall plate Tighten tilt tension knobs to reposition. Release the ClickStand™...
- Página 22 79,4 kg No — ¡Perfecto! 79,4 kg (175 lb), incluidos Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al (175 lb) los accesorios? 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿De qué está...
- Página 23 ESPAÑOL Piezas y elementos de sujeción Ver PÁGINA ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase en contacto con el servicio de atención al cliente.
- Página 24 NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los cinco orificios guía con una mecha de 5,5 mm (7/32") de diámetro.
- Página 25 Nivele la placa mural y marque las ubicaciones de los seis orificios. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta HeightFinder disponible en sanus.com. Haga los seis orificios guía con una mecha de 13 mm (1/2") de diámetro.
- Página 26 ESPAÑOL PASO 3 Acoplar el televisor a la placa mural Ver PÁGINA ¡ELEMENTO PESADO ! Es posible que necesite ayuda en este paso. Cuelgue el televisor en la placa mural enganchando la parte superior de los soportes del televisor Apoye suavemente el televisor en la placa mural .
- Página 27 ESPAÑOL Ajustes Ver PÁGINA NIVEL Para nivelar el televisor, gire el tornillo de ajuste de nivel que se encuentra en la parte superior de cualquiera de las placas de sujeción usando la llave hexagonal para subir o bajar el lado correspondiente del televisor. INCLINACIÓN El televisor debe acomodarse fácilmente al moverlo y, posteriormente, quedar en su lugar.
- Página 28 Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Like us on Facebook.com /sanussystems Follow us on Twitter: @ sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.