Oakley GMT Manual De Instrucciones página 4

04 GMT INSTRUCTION MANUAL
SETTING LOCAL TIME FOR A WORLD CITY
The small upper dial face shows the current local time for any of the 24 geographic time zones of the world. A
representative city in each time zone is listed on the watch bezel. The World City hand on the main dial face is
used to set the desired time zone.
BUTTON B BUTTON A
TO SET LOCAL TIME FOR A WORLD CITY:
1. Make sure the main crown is pushed in to the
normal position.
2. Press Button A or Button B repeatedly to set the
World City hand to the desired city on the bezel. (The
buttons move the hand in opposite directions. Press
and hold a button to advance the hand rapidly).
The hands in the small upper dial face advance
automatically to show the local time in the selected city.
When viewing local time, note the following:
• The local time (the small upper dial face) is a 24-hour
display. Numbers from 1 to 12 indicate the hours of
1 AM to 12 noon. Numbers higher than 12 indicate
PM, as in military time. (Example: 4 PM is four hours
past 12 noon, so it appears as "16". Midnight is
twelve hours past 12 noon, so it appears as "24").
• Each city listed on the bezel is a representative city
for a specific time zone. If your desired city does not
appear on the bezel, choose the city on the bezel that
shares the time zone with the place you are visiting.
[SETTING LOCAL TIME FOR A WORLD CITY CONT. ON NEXT PAGE]
Because time zones differ by full hours, the local time
display automatically changes in full hour increments
when the World City hand is adjusted. It may be
necessary to synchronize the minute hand in the local
time display with the minute hand in the home time
display (the main dial face). The local time hands can be
set manually by doing the following:
TO MANUALLY SET THE LOCAL TIME HANDS:
1. Make sure the main crown is pushed in to the
normal position.
2. Press Button A or Button B to set the World City hand
to the desired city on the bezel.
3. Pull the main crown out to the first click position and
use Button A or Button B to adjust the hands in the
local time display. (The buttons move the hands in
opposite directions. Press and hold a button to
advance the hands rapidly).
4. Push the main crown back in to the normal position.
GMT INSTRUCTION MANUAL 05
SETTING LOCAL TIME FOR A WORLD CITY (con't)
The local time display (the small upper dial face) can be
used to show Daylight Saving Time. Some countries
apply this system to make the best use of daylight
during summer. This "summer time" system advances
local clock settings by one hour during specific months.
TO DISPLAY DAYLIGHT SAVING TIME:
1. Make sure the main crown is pushed in to the
normal position.
2. Press Button A or Button B to set the World City hand
to the desired city on the bezel.
3. Press Button A to advance the World City hand
clockwise to the next city on the bezel.
The local time display is advanced by one hour from
the regular time to indicate Daylight Saving Time.