Setting The Time And Date - Oakley GMT Manual De Instrucciones

Ocultar thumbs

Contenido

Idiomas disponibles

02 GMT INSTRUCTION MANUAL

SETTING THE WATCH FOR THE FIRST TIME

Use the following instructions when setting the watch for the first time. The procedure is necessary to

synchronize the date-change function with midnight.

1. Pull the main crown out to the first click position.

2. Turn the main crown clockwise so the date advances,

and set it to yesterday's date.

3. When the second hand in the small dial face at the

left reaches the zero position (points straight up), pull

the main crown out to the second click position.

4. Turn the crown clockwise so the minute and hour

hands move forward. Continue turning until the date

changes to today's date, then continue until the

current time is reached. (If the current time is PM,

advance the hour hand all the way around to pass

noon before stopping on the current evening time).

5. Push the main crown back in to the normal position.

After the watch is set for the first time with the procedure described on the previous page, future

adjustment of time and date settings can be made by doing the following.

TO SET THE TIME:

1. Pull the main crown out to the second click position.

2. Turn the main crown clockwise or counterclockwise

to set the hour and minute hands.

(

To set the minute hand precisely, advance the

hand to 5 minutes or more past the desired time,

then turn it back to the desired time.

3. Push the main crown back in to the normal position.

When setting the time, note the following:

• The watch will resume running when the main crown

is pushed back in, so use this to set the watch to the

precise second: Wait until the second hand (in the

small dial face at the left) points straight up before

pulling the main crown to set the time. With the

second hand stopped at this zero position, restart the

watch by pushing the main crown back in when the

precise minute is reached.

GMT INSTRUCTION MANUAL 03