Seko OPL-ADVANTAGE Manual De Instalación página 8

OPL-ADVANTAGE – OPL system
2.2.2 How to connect the signal interface.
The signal interface unit may be placed inside or outside of the laundry machine as you determine to be
suitable.
To fix the signal interface use the dual lock mounting strips. (Output is 24 Volt DC by means of a single
RJ45, telephone type cable to connect to the OPL Advantage).
Picture 4
The signal interface has twelve 51 cm (20") wires which connect to the laundry machine trigger signal
source.
To connect the signal interface to the OPL Advantage, you need to use the phone type cable with 8 contacts.
(RJ-45 cable) Wires are color coded to correspond to the pumps as follows:
Pump
1
2
3
4
5
6

All the trigger signal have a filter of 5 seconds.

If you want use just one common, connect together the wires marked "COM" to the
common of the laundry machine.

If you want use the drain counter, you need to connect the drain valve to Pump 1 (Black-
Black COM wire) of the signal interface.

If the laundry machine has residual tension on the signal, please open the Sim's box and
move the jumper as show the picture below:
Jumper
Picture 5
OPL-ADVANTAGE
Wire color Common
Black Black-COM
Brown Brown-COM
Red Red-COM
Orange Orange-COM
Yellow Yellow-COM
Green Green-COM
IN 1 IN 2 IN 3 IN 4
code 0000136607
IN 5 IN 6
rev. 1.6 EN 6