Seko OPL-ADVANTAGE Manual De Instalación página 9

OPL-ADVANTAGE – OPL system
2.2.3 How to connect the remote control
Mount the control unit in an easily accessible location with the dual lock mounting strips.
1. Connect the remote control to the OPL Advantage with the standard phone cable (6 contacts) into
the terminal marked "CONSOLE" on the circuit board of pump unit. (To program the OPL Advantage
see page 9).
2.3 Selection of the flow rate for the pumps (mod. OPL Advantage High volume only)
In order to optimize the dosing function, on the OPL Advantage model High volume it is possible to select the
speed of the motors and therefore the flow rate of the pumps. (Picture 6)
•
On OPL Advantage H is possible to select:
Picture 6

The OPL Advantage High Volume systems are factory set with 34 oz/min of flow rate.
OPL-ADVANTAGE
Select the flow rate just
moving the jumper on
the motor circuit board
code 0000136607
17 oz/min = 30 l/h
34 oz/min = 60 l/h
51 oz/min = 90 l/h
68 oz/min = 120 l/h
rev. 1.6 EN 7