Button Functions; Starting The Fitness Tracker System - Timex M597 Guía De Instrucciones

TIME Displays the time of day and date
CHRONO Use the chronograph for timing purposes
RECALL Use to review previous chronograph timed
events
TIMER The Countdown Timer is useful for timing
fixed-time events
INT TIMER The Interval Timer is great for timing fixed
intervals during workouts
ACTIVITY Use Activity mode to track steps, activity goals
and calories burned
CALIBRATE Calibrate mode is used to setup the fitness POD
and make it very accurate
ALARM Three alarms are available to keep you on time

BUTTON FUNCTIONS

INDIGLO
®
MODE
START/SPLIT
When setting, each button has a different function as
indicated above. Display indicates when button changes
function.
4
1. To turn on the POD, slide the switch to the ON position.
2. Clip the POD to your waistband or belt. Make sure the
3. To turn the receiver on, press the ON/OFF button on the
4. The wave on the ANTENNA icon
5. ANTENNA icon
SET
NOTE: Though the Fitness Tracker system has a working
range of about 3 feet (1 meter) from the POD to the watch,
for the most reliable operation, make sure that the watch is
ON/OFF
as close to the POD as possible when starting the system.
TIPS:
• As a convenience, when entering any timing or activity
STOP/RESET
• To turn off the system, press and hold ON/OFF on the
• To increase battery life, make sure you turn the POD and

STARTING THE FITNESS TRACKER SYSTEM

ON/OFF
POD is on the hip and parallel to the ground. For best
results, place the POD on the same side of your body as
your watch.
watch. Make sure you are at least 6 feet away from
other Fitness Tracker users.
watch looks for the POD.
V
is shown steady when the POD and
watch are communicating and successfully linked.
mode, the watch will automatically start looking for the
POD without having to press the ON/OFF button on the
watch.
watch for 4 seconds. Slide the POD switch to OFF to turn
off the POD.
watch receiver off when not in use.
v
blinks while the
5