Wayne DSP60 Manual De Instrucciones Y Lista De Repuestos página 3

Operating Instructions and Parts Manual
Check valve 45
o
Vent
Inlet
Basin
Figure 3 - Prefabricated Basins
Limited Warranty
For three years from the date of purchase, Wayne Water Systems ("Wayne") will repair or re place, at its option, for the original purchaser
any part or parts of its Pond Kit, Sump Pumps or Water Pumps ("Product") found upon examination by Wayne to be defective in materials
or work man ship. Please call Wayne (800-237-0987) for instructions or see your dealer. Be pre pared to provide the model and serial number
when exercising this warranty. All trans por ta tion charges on Products or parts submitted for repair or replacement must be paid by
purchaser.
This Limited Warranty does not cover Products which have been damaged as a result of accident, abuse, misuse, neglect, improper
installation, improper main te nance, or failure to operate in accordance with Wayne's written instructions.
THERE IS NO OTHER EXPRESS WARRANTY. IM PLIED WARRANTIES, IN CLUD ING THOSE OF MER CHANT ABIL I TY AND FITNESS FOR
A PARTICULAR PUR POSE, ARE LIMITED TO THREE YEARS FROM THE DATE OF PUR CHASE. THIS IS THE EXCLUSIVE REM E DY AND
ANY LIABILITY FOR ANY AND ALL IN DI RECT OR CON SE QUEN TIAL DAM AG ES OR EX PENS ES WHATSOEVER IS EXCLUDED.
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusions or limitations of incidental or
consequential damages, so the above lim i ta tions might not apply to you. This limited war ran ty gives you specific legal rights, and you may
also have other legal rights which vary from state to state.
In no event, whether as a result of breach of contract warranty, tort (in clud ing negligence) or otherwise, shall Wayne or its suppliers be
liable for any special, consequential, incidental or penal damages including, but not limited to loss of profit or revenues, loss of use of the
products or any associated equipment, damage to associated equip ment, cost of capital, cost of substitute products, facilities, services or
replacement power, downtime costs, or claims of buyer's cus tom ers for such damages.
You MUST retain your purchase receipt along with this form. In the event you need to exercise a warranty claim, you MUST send a copy
of the purchase receipt along with the material or correspondence. Please call Wayne (800-237-0987) for return authorization and
instructions.
DO NOT MAIL THIS FORM TO WAYNE. Use this form only to maintain your records.
MODEL NO. _____________________ SERIAL NO. ________________________ INSTALLATION DATE _____________________
ATTACH YOUR RECEIPT HERE
Maintenance
unplugged before attempting to
service or remove any component. This
pump is assembled in the factory using
special equipment; therefore only
authorized service dealers or qualified
electricians should attempt to repair
this unit. Improper repair can cause an
electrical shock hazard.
under pressure because of heat. Let the
pump cool for a minimum of two hours
before servicing this unit.
1. Disassembly of the motor prior to
Gasket
expiration of war ran ty will void the
warranty. It might also cause internal
leakage and damage to the unit. If
repairs are required, return the pump to
the dealer from whom it was pur chased
or call 1-800-237-0987. If motor is ever
disassembled the o-rings must be
replaced. Care must be taken to ensure
that all seals do not leak.
2. After the basin cover is removed and
necessary dis charge piping disconnected,
lift pump from basin.
3. Pump should be checked on a regular
basis for proper op er a tion. If anything
has changed since unit was new, the unit
should be removed and repaired or
replaced. Only qualified electricians or
service peo ple should at tempt to repair
Make certain that
the pump is
4. Place the pump in a suitable area where
5. Submerge the complete pump in a
6. Clean all dirt and deposits from the
The pump contains
oil that may be
7. Clean all dirt and deposits away from
for lubrication and motor heat transfer.
This oil can be harmful to the
environment. Check state environmental
laws before disposing of this oil. This oil
can be harmful to aquatic life so
consideration should be exercised in the
application of this pump.
3
this unit. Improper repair and/or
assembly can cause an electrical shock
hazard.
it can be cleaned thoroughly. Remove all
scale and deposits on pump.
disinfectant so lu tion (10% chlorine
bleach solution) for at least one hour
before handling the pump.
pump float. Make sure float moves
freely after cleaning.
pump inlet and volute.
This pump contains
dielectric motor oil
www.waynepumps.com