Festo SPC-AIF Serie Manual De Instrucciones página 13

1 User instructionsEnglish
The axis interface type SPC-AIF-... is used to connect pneu-
matic axes to the SPC200 Smart Positioning Controller. It
establishes the link with the MPYE-... proportional direc-
tional control valve and one of the following measuring
systems.
Axis interface type Permitted measuring system type
SPC-AIF-POT MLO-POT-...-TLF or integrated systems
DNCM-... (analogue systems)
SPC-AIF-POT-LWG MLO-POT-...-LWG or integrated systems
DSMI-... (analogue systems)
SPC-AIF-MTS MME-MTS-...-TLF-AIF or integrated systems
DGPI-(L)...-...-AIF (digital systems)
Detailed information on the axis interface can be found in
the P.BE-SPC200-... User Manual.
Caution
Pay strict attention to the following instructions shown
therein:
– safety guidelines
– specifications for the use of each module and compo-
nent.
Warning
Prior to any installation or maintenance work, switch off
the power sources in the following sequence:
1. Compressed air supply
2. Load supply and operating voltage supply for the
SPC200.
Festo SPC-AIF-... 0209a English 13