Features; Lock-Off Button; Assembly - Craftsman 315.CT2040 Manual Del Operador

PRODUCT SPECIFICATIONS
Motor ............................................................... 19.2 Volt DC
Blade Diameter ....................................................... 6-1/2 in.
Blade Arbor ............................................................... 5/8 in.
KNOW YOUR CIRCULAR SAW
See Figure 1, page i.
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
BEVEL ADJUSTMENT
The bevel adjustment allows you to set the circular saw for
bevel cuts from 0° to 50°.
BLADE WRENCH STORAGE
Convenient wrench storage for quick blade changes.
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure all items listed on the box are included.
WARNING:
Do not use this product if any parts
on the Packing List are already assembled to your
product when you unpack it. Parts on this list are not
assembled to the product by the manufacturer and
require customer installation. Use of a product that
may have been improperly assembled could result in
serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.

FEATURES

Cutting Depth at 0° ............................................... 2-1/16 in.
Cutting Depth at 45° ............................................. 1-7/16 in.
No Load Speed .................................................. 4,700/min.
DEPTH LOCK KNOB
The depth lock knob adjusts the depth of cut from 0 in. to
2-1/16 in.

LOCK-OFF BUTTON

The lock-off button reduces the possibility of accidental
starting.
SPINDLE LOCK BUTTON
The spindle lock button allows you to secure the blade when
turning the blade screw.
WIDTH OF CUT SCALE
When making straight cross cuts or rip cuts, the scale can
be used to measure up to 4 in. on the right side of the blade,
and up to 1 in. on the left side of the blade.

ASSEMBLY

PACKING LIST
Circular Saw
6-1/2 in. Blade
Blade Wrench
Operator's Manual
WARNING:
the tool until the missing parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
7 – English
If any parts are missing do not operate
Do not attempt to modify this tool
To prevent accidental starting that