Publicidad
Idiomas disponibles
Idiomas disponibles
8
When the cases are mounted, especially when they are loaded,
greater side wind susceptibility will cause a change in vehicle
handling characteristics while riding, taking curves, and braking!
Exercise caution in high winds! Due to the changes in vehicle
handling characteristics, accelerate to the permitted maximum
speed of 150 km/h slowly!
Always use two cases at the same time and distribute the load
evenly between the two sides!
Secure the load against slipping!
Ensure that the load never exceeds 10 kg per case!
When cleaning with a pressure cleaner, keep a distance of at least
one meter away from the cases!
Use a neutral cleaning agent (water with neutral soap)!
Scope of supply
1x plastic case, left (36 liter capacity)
1x plastic case, right (30 liter capacity)
2x locking cylinder
Locking cylinder (2x) included
1x locking cylinder
12x wafer
15x spring for wafer
2x snap-in plate
1x spring for snap-in plate
1x O-ring
This kit contains many small parts. It is advisable to carry out
assembly while sitting at a table!
NOTE
The springs
for the wafers differ from spring
plate in terms of the lower spring rate.
The snap-in plate
can be identifi ed by the fact that no number is
stamped on it.
Locking cylinder assembly
- Insert springs
into chambers
for the snap-in
,
and
.
Publicidad
