LaserLiner PowerCross-Laser 5G Manual De Instrucciones página 15

Positioning laser lines
4
The top section of the laser unit can be turned on the plinth to align the
lasers approximately. Precise positioning can then be done with the Vernier
adjustment (4). The adjustable feet (7) allow the device to be positioned
on sloping surfaces.
The freely rotatable horizontal circle (3) makes it easy to turn the device
to the required angle. Simply set the scale to zero, then rotate the device
to the angle you want.
Hand receiver mode
5
Optional: Working with the laser receiver GRX
Use an GRX laser receiver (optional) to carry out levelling at great distances
or when the laser lines are no longer visible.
Manual receiver mode is switched on automatically.
!
Follow the operating instructions of the corresponding laser receiver.
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be collected
separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=pocrolas5g
3
4
PowerCross-Laser 5G
15
EN