salmson Module IR Instrucciones De Instalación Y Funcionamiento página 25

ENGLISH
6.3.2 Function menu 2: Display/Operating data
Hydraulic and electrical operating data are displayed in this
function menu. Status messages and information on the pump
mode can also be called up.
2
1
• Display of the current
1
operating data
• Back to the main menu
2
→
3
4
• Display of the current
3
pump status
• Display of external
4
control commands
• Off = external
control command
inactive
• On = external control
command active
• Precondition for display
of external control
commands:
• Corresponding IF module
plugged in
• Pump connected to
interface converter
→
5
6
• Display of the current
5
pump mode
• Display of an analog
6
control input 0-10V
• Off = Control input 0-10V
deactivated
• On = Control input 0-10V
activated.
Precondition for display
of an analog control
input 0-10V:
• Corresponding IF module
plugged in
• Pump connected to
interface converter
25