eTIGER S6 SIM Wi-Fi Secual Guia De Inicio Rapido página 11

Smart Alarm
Step 3 : Set the Wi-Fi network you will need your alarm to connect with. If your
are already connected to your home network the app will automatically use this
network.
Enter the Wi-Fi password of the router, confirm, and wait for about 20 seconds to
get a response (until the %-circle in the app reached 100%)
Step 4 : After connection procedure is complete , you can set the alarm name to
complete the connection.
Note
There are two ways to connect the alarm to your app : EZ and AP mode.
please use the AP mode when you cannot connect your alarm as described
above. A Full manual is available on etiger.com
EN - 9
Your Wi-Fi
SSID
Your Password
XXXXXXXXX
CONFIRM
EN