Hourmeter; Parking Brake Function; Cruise Control - Craftsman CTX 9000 Manual Del Operador

Hourmeter

The hourmeter (Figure 3) measures the number of hours
the key has been in the RUN position. The hourmeter
will fl ash an initial oil change indicator at 5 hours, and a
lubrication reminder every 50 hours. These reminders
display for approximately two hours and will automatically
reset themselves.
NOTE: The hourmeter will register the passage of time
when the key is in the RUN position, even if the engine
is not running. The hourmeter has a self contained power
source so the total hours are always visible.

Parking Brake Function

Applying the Parking Brake - See Figure 4. To lock the
parking brake, release the ground speed pedals (A), fully
depress the brake pedal (B), pull UP on the parking brake
knob (C), and then release brake pedal.
Releasing the Parking Brake - See Figure 4. To release
the parking brake, fully depress the brake pedal (B) and
push the parking brake knob (C) DOWN.

Cruise Control

TO ENGAGE:
1. Pull up on the cruise control knob (D, Figure 4).
2. Depress the forward ground speed pedal (A).
3. Lift up the cruise control knob (D) when desired
speed is reached. The Cruise will lock in one of its five
locking positions.
TO DISENGAGE:
1. Depress the brake pedal (B).
OR
2. Depress the forward ground speed pedal (A).
12
HOURS
C
C
1/10
Figure 3
A
D
Figure 4