Kinetec Centura B&W Manual De Empleo página 41

Using the hand control
PROGRAM MODE: To enter a program
Beginning
Switch the unit OFF
Press the 2 keys at the same time and switch the unit ON
Then
To change the program if necessary
To choose the movement
To display the extension or flexion limit of the movement
To change the limit if necessary
To confirm the new value, press another key
or wait more than 3 seconds
To record program 10
Then
OR
To cancel the program
To exit program mode, switch the unit OFF and switch
back ON.
Kinetec Centura B&W™
Keys to
Display
press
KINETEC
Centura B&W V01.0
and
Program
EMPTY
Program
EMPTY
or
Arm FLEXED
50 prg nr10
Arm STRAIGHT
30 prg nr10
Arm STRAIGHT
0 prg nr10
or
Arm STRAIGHT
0 prg nr10
Arm STRAIGHT
0 prg nr10
or
Arm STRAIGHT
SPEEd:
Load : _ _ _ _ _ _
No timer
Pause low
Arm STRAIGHT
Save:+
Arm STRAIGHT
Saving
Program
EMPTY
Arm STRAIGHT
clearing
Program
EMPTY
KINETEC
Centura b&W V01.0
13/24
Welcome text displayed for 3 seconds
2
The program number blinks.
10
The new program number blinks.
90
The display indicates the movement.
90
90
The value blinks.
90
The new value blinks.
110
2
While the value blinks press
or
to change if necessary
0
clear:-
Program 10 has been recorded and the display
indicates the next program so you can change
11
another program.
Program 10 has been removed and the display
indicates the next program so you can change
another program.
11
To use the modified program see page 12.
Remarks
EN