Setting Up The Patient - Bed - Kinetec Centura B&W Manual De Empleo

Mechanical adjustments

Setting up the patient - BED

Make sure the straps are clean.
Put the unit in the position that is the most comfortable for the patient.
b
• Position the patient in the bed in a comfortable position and supporting the affected arm.
• Position The device Kinetec Centura B&W™ as close as possible to the bed and lock the wheel brakes.
• Unscrew the knob (17) and adjust the slope of the splint (47) and motor unit so that the shoulder depth adjustment bar
(46) is parallel to the patient's upper body or in another position (see page 16).
• Slide the splint (47) and motor unit toward the patient by loosening the knob (4) and place the patient's arm in the
supports. Strap the arm in position.
Adjust the length of the:
a – arm splint.
b – forearm splint.
Starting the unit
• Select the movement:
- Press
- or select a program
Kinetec Centura B&W™
17
46
a
or and set the movement parameters (see page 11).
(see page 12).
4
47
19/24 EN