Safety Message To Installers - Federal Signal SST-MV Manual De Instalación Y Mantenimiento

Ocultar thumbs

página de 17

/ 17
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SST-MV

A. General

The Federal Signal Model SST-MV is a solid-state signalling device that can be used for

general purpose signalling. Any one of four distinctive signalling tones may be selected

by the installation of the J4 or J5 plugs in the appropriate positions. The tone can easily

be changed if the signalling requirements change. The Model SST-MV can be installed

either indoors or outdoors. The SST-MV is listed at Underwriters Laboratories, File

E4813 (Category UCST) Contl. #558H. The SST-MV is also cUL listed.

B. Specifications

Operating Voltage

Operating Current

Sound Output

Wail

Yelp

Horn

Temporal Slow Whoop

Weight (approx.)

Dimensions (HWD)

C. Unpacking

After unpacking the unit, examine it carefully for damage that may have occurred in

transit. If the equipment has been damaged, file a claim immediately with the carrier,

stating the extent of the damage. Before proceeding, ensure that the parts listed in the

KIT CONTENTS LIST have been supplied.

D. Kit Contents List

Quantity

E. Installation

People's lives depend on safe installation of our products. It is important to follow all

instructions shipped with the products. This device is to be installed by a trained electrician

who is thoroughly familiar with the National Electrical Code and will follow the NEC

Guidelines as well as local codes.

The selection of the mounting location for the device, its controls and the routing of the

wiring is to be accomplished under the direction of the Facilities Engineer and the Safety

engineer. In addition, listed below are some other important safety instructions and

precautions you should follow:

SELECTABLE SIRENTONE-MULTI VOLT

Description

Adapter

Gasket, Adapter

Connector Plug, 4-Position