(IMPORTANT SAFEGUARDS)
Be careful to keep this safety information. Please read this information
READ ALL INSTRUCTIONS BEFORE USING
DANGER
• Do not use a damaged power plug or plug into a loose electric outlet.
• Please connect the power plug to a grounded electrical outlet rated for 120 V ~ 60 Hz.
• Do not move the product by pulling on the power cord.
• Do not handle the product or power plug with wet hands.
• Do not forcefully bend the power cord or place heavy objects on it to prevent it from
being damaged or deformed.
• Do not connect and pull out the power plug or cord repeatedly.
• If the electric outlet is wet, carefully unplug the product and let the electric outlet dry
completely before subsequent use.
• Unplug the product before cleaning, repairing, inspecting, or replacing parts.
• Remove any dust or water from the power plug prior to plugging in.
• Do not plug the product into an electrical outlet or power strip that is being used by too
many other products. Use an electrical outlet adequate for the wattage of the product.
• Unplug the system if it is not going to be used for a long time.
• If the power cord is damaged – do not operate the product and do not attempt to repair,
modify, or replace the cord yourself. Contact the Brondell Service Center toll free at 888-
542-3355 or email us through our website.
• If the product produces a strange noise, a burning smell, or emits smoke, unplug it
immediately from the electrical outlet and contact Brondell. Failure to do so may result in
electric shock or fire.
• Do not insert any wires or sharp objects into the air sensor or any product gaps. This may
result in electric shock, fire, or product damage.
SAVE THESE INSTRUCTIONS
2
SAFETY INFORMATION
to prevent property loss and ensure safety.
: If not observed, serious injury or even death may occur as a result.