Using Your Player; Controlling Dvd Or Audio Cd Playback - Insignia NS-CPDVD7 Guia Del Usuario

Insignia NS-CPDVD7 Portable DVD Player
3 Plug the other end of the optional RCA cable into the A/V jacks on
the TV or monitor. The white connector goes into the left audio
jack. The red connector goes into the right audio jack. The yellow
connector goes into the video jack.

Using your player

To play a disc:
1 Make sure that your player is connected to power or that the
battery is charged.
2 Slide the OFF/ON switch on the front side of your player to the ON
position.
3 Slide the OPEN switch on the front of your player. The disc tray
opens.
4 Place a disc, label side up, in the disc tray, then press down on the
area marked CLOSE to close the tray. The disc starts playing
automatically.
5 If necessary, rotate the VOLUME control to adjust the volume.
6 If necessary, rotate the BRIGHTNESS control to adjust the
brightness for a DVD.
7 To stop playback, press

Controlling DVD or audio CD playback

To control disc playback:
• Press
you stopped. If you press
point where you stopped.
• Press
starts playing at the beginning of the disc.
• Press
playback.
• Press
button, the fast-forward speed changes from 2 to 4 to 8 to 16 to
32 times the normal speed.
Note
Your player and most DVDs have region codes that help
control illegal distribution of DVDs. The region code for your
player is 1. You can only play DVDs with a region code of 1.
The region code for a DVD is printed on the DVD or the DVD
packaging.
once to stop playback. Your player remembers where
twice to stop playback. If you press
to pause playback. Press this button again to resume
to fast-forward on the disc. Each time you press this
www.insignia-products.com
.
, your player starts playing at the
, your player
11