Specifications; General Specifications - koban KPA 01 Manual De Instrucciones

%
Percentage (Duty Cycle)
mV, V, A millivolts, volts, amps
nF, μF, mF nanofarad, microfarad, millifarad
Ω, kΩ, MΩ ohms, kiliohms, megaohms
Hz, kHz, MHZ hertz, kilohertz, megahertz
K-T
K-type thermocouple measurement
ºC, ºF
celsius, farenheit
NVC Non-contact voltage

Specifications

The Meter should be calibrated annually between 18°C ~ 28°C and a relative
humidity less than 75%.

General Specifications

• Manual and Auto Mode
• Power Overload Protection
• Maximum Voltage Between Circuit and Ground:
• 1000V DC or 1000V AC
• Maximum Working Height: 2000m
• Display: LCD
• Maximum Display Number: 5999
• Auto Polarity Indication, '-'Indicates Negative
• Overload Indication: '0L' Or '-0L'
• Sampling Frequency: 4 Times / Sec
• Units Display: Display Functions and Units.
• Auto Power Off: 20 Minutes
• Input Power : 4.5V DC
• Battery Type: AAA x3
• Low Battery Indication: LCD Display
• Temperature: Less Than 0.1 X Specified Accuracy/°C
• Working Environment Temperature: 18°C ~28°C
• Storage Temperature:-10°C ~50°C
• Size 238×92×50mm
• Weight: ~420g (Including battery)
www.grupotemper.com
KPA 01
Digital clamp multimeter
Instructions manual | 25