Chattanooga ADAPTA ADP400 Manual De Usuario página 14

techNicAl speciFicAtioNs
electromAgNetic compAtibility tAbles
Recommended separation distances between portable and mobile RF communications equipment and the
The Adapta ADP400 traction table is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the Adapta ADP400 traction table can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Adapta ADP400 traction table as recommended below.
Rated maximum output
power of transmitter
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
Adapta ADP400 traction table
Separation distance according to frequency of transmitter
W
150 kHz to 80 MHz
d = [3.5]√P
V1
0.12
0.38
1.2
3.8
12
m
80 MHz to 800 MHz 800 MHz to 2.5 GHz
d = [3.5]√P
E1
0.12 0.23
0.38 0.73
1.2 2.3
3.8 7.3
12 23
11
Adapta® ADP400
d = [7]√P
E1