Publicidad
Enlaces rápidos
5364407COM
6 Drawer Dresser
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Easy
Assembly Difficulty Meter
Follow Ameriwood Home
B345364407COM1
Tough
You
Tube
Publicidad
Manuales relacionados para Ameriwood 5364407COM
Resumen de contenidos para Ameriwood 5364407COM
- Página 1 Easy Tough Assembly Difficulty Meter Serious or fatal crushing injuries can occur from tipping furniture. Follow Ameriwood Home WARNING: Manufacturer assumes no liability for improper installation or excessive loads placed on screws or bracket. This wall anchor Tube is not a substitute for proper adult supervision.
-
Página 2: Helpful Hints
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 2 HOURS... -
Página 3: Before You Start
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. - Página 4 Board Identification Not actual size Left Panel Right Panel Partition 35364407020 35364407030 35364407040 35364407010 Bottom Top Rail Bottom Rail Support 35364407080 35364000050 35364407060 35364407070 Left Drawer Front Right Drawer Front Drawer Bottom Drawer Brace 35364407090 35364407100 39991340063910D 35538000121 ameriwoodhome.com...
- Página 5 Board Identification Not actual size Left UpperDrawer Front 35364130 Right Upper Drawer Front Left Front Leg Right Front Leg Left Rear Leg Right Rear Leg 35364407140 35364407150 35364407160 35364407180 35364407170 This piece is paperboard construction. It is not made from wood, but is required for BACK the assembly of your unit.
- Página 6 Board Identification This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. SIDE SIDE BACK BACK Right Upper Drawer Left Upper Drawer SIDE SIDE SIDE SIDE BACK BACK Left Drawer Right Drawer SIDE SIDE...
-
Página 7: Part List
Part List Actual Size (x18) (x60) (x74) (x18) (x12) #A22620 #A11080 #A12120 #A22610 #A21660 #8 x 7/16" pan head cam lock #6 x 7/16" flat head cam bolt wood dowel (x12) (x12) (x8) (x6) (x24) #A22910 #A22920 #A53600 #A21110 #A21520 connector bolt connector angle bracket... - Página 8 Part List Left Cabinet Member Right Cabinet Member Left Drawer Member Right Drawer Member (x4) (x6) (x1) #A54510 #A56750 #A84050 drawer bracket (small) safety bracket kit drawer slide pkg. (x8) (x6) (x1) #A54520 #A52926 #43100 drawer bracket (large) handle foot (x3) #43490 spacer...
- Página 9 STEP 1 (x2) (x3) (x2) (x6) #A22620 #A22610 #A21660 #A22920 Note: Cam bolts (2) screw into the outside hole of each pair. finished edge Quick Assembly You will need to tap the connector (7) with a hammer to fully insert. Be sure the connector is positioned as shown before tapping into hole.
- Página 10 STEP 2 (x2) (x3) (x2) (x6) #A22620 #A22610 #A21660 #A22920 Note: Cam bolts (2) screw into the outside hole of each pair. finished edge Quick Assembly You will need to tap the connector (7) with a hammer to fully insert. Be sure the connector is positioned as shown Proper orientation of CAM LOCK before tapping into hole.
- Página 11 STEP 3 (x12) #A22910 Note: The rear legs (Q&R) have small pilot holes on the back surface. ameriwoodhome.com...
- Página 12 STEP 4 Press legs (O&Q) against the left panel (A) as shown so the connector bolt (6) engages the connector (7). Turn the screw in the center of the connector (7) clockwise to lock in place. Turn screw to lock in place. Note: For ease of leg attachment, place a piece of end foam (packaging material) under both ends of the left panel (A).
- Página 13 STEP 5 marked with a "L" Left Cabinet Member (x9) (x3) #A11080 #A56750 ameriwoodhome.com...
- Página 14 STEP 6 Press legs (P&R) against the right panel (B) as shown so the connector bolt (6) engages the connector (7). Turn the screw in the center of the connector (7) clockwise to lock in place. Turn screw to lock in place. Note: For ease of leg attachment, place a piece of end foam (packaging material) under both ends of the right panel (B).
- Página 15 STEP 7 marked with a "R" Right Cabinet Member (x9) (x3) #A11080 #A56750 ameriwoodhome.com...
- Página 16 STEP 8 marked with a "L" Left Cabinet Member marked with a "R" Right Cabinet Member (x2) (x2) (x18) (x3) #A22620 #A21660 #A11080 #A56750 Quick Assembly Proper orientation of CAM LOCK right surface finished edge left surface finished edge ameriwoodhome.com...
- Página 17 STEP 9 #A84050 (x6) (x8) (x4) safety bracket kit #A22610 #A12120 #A53600 finished edge * raw edges are shaded ameriwoodhome.com...
- Página 18 STEP 10 Quick Assembly (x4) (x4) Proper orientation of CAM LOCK #A22620 #A21660 ameriwoodhome.com...
- Página 19 STEP 11 (x8) (x4) #A12120 #A53600 Turn the part over from the previous step so the top surface faces up. Note, the bottom surface has the cam locks (1) in it. Do not fully tighten the screws (5) going into the bottom rail (G) at this time.
- Página 20 STEP 12 Quick Assembly (x2) (x2) Proper orientation of CAM LOCK #A22620 #A21660 ameriwoodhome.com...
- Página 21 STEP 13 (x2) #A23030 finished edge ameriwoodhome.com...
- Página 22 STEP 14 ameriwoodhome.com...
- Página 23 STEP 15 Note: Support (H) with fit into notch of the partition (C). finished edge ameriwoodhome.com...
- Página 24 STEP 16 ameriwoodhome.com...
- Página 25 STEP 17 (x3) (x1) #43490 #43100 Using a hammer, tap the spacers (20) and foot (19) into the bottom (E) as shown. Be sure the bottom rail (G) is positioned all the way up into the notch of the partition (C). Now tighten the screws that were left loose in step 11.
- Página 26 STEP 18 (x10) (x24) #A12120 #A21110 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. Positon back panel as shown. Align squarely with outer edges. Attach back panel to rear legs (O&P) with screws (5) but do not tighten. Flush bottom edge of back panel with bottom edge of the bottom and nail straight into back edges of top (C) and bottom (D).
- Página 27 STEP 19 (x24) (x4) (x8) (x6) #A12120 #A54510 #A54520 #A22610 (small) (large) Note: Small bracket (16) goes on the left and right upper drawer fronts (M&N) and large bracket (17) goes on the left and right drawer front (I&J). ameriwoodhome.com...
- Página 28 STEP 20 You will be assembling 6 drawers. Two smaller drawers (left and right uppers) and four larger drawers (left and right). The smaller drawer parts go with the smaller drawer fronts (M&N) and the larger with the larger drawer fronts (I&J). (x24) #A12120 SIDE...
- Página 29 STEP 21 Quick Assembly Proper orientation of CAM LOCK (x6) (x6) #A21520 #A22620 Tap compression dowel (10) lightly with a hammer to insert. ameriwoodhome.com...
- Página 30 STEP 22 SIDE SIDE SIDE SIDE ameriwoodhome.com...
- Página 31 STEP 23 Insert the drawer bottom (K) into the groove of the drawer sides and drawer front as shown in all six drawers. unfinsihed surface SIDE SIDE ameriwoodhome.com...
- Página 32 STEP 24 You will need to tap the drive fasteners (12) with a hammer to securely fasten. (x36) #A21970 Attached the drawer backs as shown. The two smaller drawer backs with go on the smaller drawers and the larger drawer backs go on the four larger drawers. SIDE BACK SIDE...
- Página 33 STEP 25 Left Drawer Member Right Drawer Member (x6) (x6) (x24) (x12) #52926 #A56750 #A11080 #A17400 marked with a "R" Attach the slide first then the handle. marked with a "L" SIDE SIDE ameriwoodhome.com...
- Página 34 STEP 26 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. #A84050 safety bracket kit IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Página 35 STEP 27 Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. Install the drawers in the positions shown. roller cabinet member drawer runner roller ameriwoodhome.com...
- Página 36 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 75 lbs 34 kg 35 lbs 15.8 kg (each drawer) Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
- Página 37 Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback. ameriwoodhome.com...
- Página 38 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 39 Español Páginas 9 Nota: Coloque los pernos (2) en el agujero exterior de cada par. Necesitará golpear el conector (7) con un martillo para insertarlo por completo. Asegúrese de que el conector esté posicionado como muestra la imagen antes de situarlo en el agujero. Páginas 10 Nota: Coloque los pernos (2) en el agujero exterior de cada par.
- Página 40 Español Pagina 19 Dele la vuelta desde el paso anterior para que la superficie principal esté mirando hacia arriba. Tenga en cuenta que la superficie inferior tiene las cerraduras (1) en ella. Esta vez, no apriete los tornillos (5) por completo en el carril inferior (G). Cerraduras (1) en la superficie inferior.
- Página 41 Español Página 28 Tendrá que montar los seis cajones: los dos cajones más pequeños (los superiores situados a la izquierda y a la derecha) y los cuatro más grandes (izquierda y derecha). Las partes más pequeñas del cajón van con las partes frontales pequeñas del cajón (M y N), y las partes más grandes van con las partes frontales grandes del cajón (I y J).
- Página 42 Visite el sitio web de su tienda local, califique su comprado y denos sus comentarios! Nos gustaría enviar un gran "Agradecimiento" a todos nuestros clientes por tomarse el tiempo de ensamblar este producto de Ameriwood Home, y por darnos sus valiosos comentarios. Gracias ameriwoodhome.com...
- Página 43 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à...
- Página 44 Français Page 10 Note : les pênes battants (2) se visse dans l'intérieur du trou de chaque paire. Vous aurez besoin d'enfoncer le connecteur (7) avec un marteau pour l'insérer entièrement. Assurez-vous que le connecteur soit positionné comme indiqué avant de l'enfoncer dans le trou. Page 11 Note : les pieds arrières (Q et R) ont de petits avant-trous sur la surface arrière.
- Página 45 Français Page 23 Note : le support (H) ira dans l'encoche de la cloison (C). Page 25 En utilisant un marteau, enfoncez les entretoises (20) et le pied (19) dans le fond (E) comme indiqué. Assurez-vous que le rail du fond (G) soit positionné jusqu'en haut dans l'encoche de la cloison (C ). Resserrez maintenant les vis qui ne l'étaient pas dans l'étape 11.
- Página 46 Français Page 32 Vous allez devoir enfoncer les fixations (12) avec un marteau pour les fixer fermement. Fixez les arrières des tiroirs comme indiqué. L'arrière des deux tiroirs plus petits va avec les tiroirs plus petits et l'arrière des tiroirs plus grands va avec les quatre tiroirs plus grands. Page 33 Fixez la glissière en premier, puis la poignée.
- Página 47 Visitez le site Web de votre détaillant local, évaluez votre produit acheté et laissez-nous quelques commentaires ! Nous tenons à offrir un grand "Merci" à tous nos clients pour avoir pris le temps d'assembler ce produit "Ameriwood Home", et de nous donner vos commentaires précieux. Merci ameriwoodhome.com...