Doorbell - Niko 16-601 Manual Del Usuario

MODULES
4. DOORBELL 16-600 & 16-600-01
4.1. Description
The aluminium push button of doorbell 16-600 can be personalized on demand by engraving a
house number, name, logo... (ref. for custom-made goods: 16-600-99). Please send a completed
form for custom-made goods (available at Niko, the wholesaler and the sales representatives of Niko)
to Niko NV (address at the back of this user manual).
Doorbell 16-600-01 is provided with a plexiglass cover cap. Behind the cover cap, you can place a
name card for personalization (16-601-99). Please send a completed form for custom-made goods
(available at Niko, the wholesaler and the sales representatives of Niko) to Niko NV (address at the
back of this user manual).
The doorbell module is used in combination with other modules from the range Access Control Design.
The module is flush mounted as 2nd, 3rd, ... or max. 5th additional bell push button into one of the
external units. The first bell push button of an external unit that is connected to a 16-651 always
has to be an intelligent ring module (16-601 or 16-602).
4.2. Installation
Connect the doorbell module to the flat cable. First mount the modules that have to be placed on top
of the doorbell. Connect the flat cable and mount the module in the external unit by means of the 4
supplied screws (see '2. Mounting the modules').
If you wish to connect more than 2 doorbells to one 16-651, open the doorbell module by means
of the 4 Allen screws at the back of the module. Gently remove the plastic cover cap. There is some
adhesive between the cover cap and the module. This could cause you some difficulties in removing
the cover cap. If this is the case, use a small screwdriver.
Remove the wire from terminal PB2 and insert it in terminal PB3 (fig.4) for the 3rd bell push button,
in terminal PB4 for the 4th bell push button... up to max. 6 bell push buttons (PB6).
46
fig.4: connecting several doorbells to one 16-651
PB2 = 2nd bell push button
PB3 = 3rd bell push button
PB4 = 4th bell push button
PB5 = 5th bell push button
PB6 = 6th bell push button
EN