Bialetti Easy Timer Instructiones De Uso página 20

EN
The display shows the writing ALARM, in the top left corner, and the hours start blinking.
•
Set hour and minute as shown in the paragraph "Clock Function".
•
To complete the setting of the clock and the timer, press the MODE button once more.
•
To activate the programmed start, press the button "10" on the display, the bell icon
•
will appear.
At the time set, the base automatically starts, alerting the user the coffee is ready,
•
the temperature maintenance function is automatically started up to 30' from the base
switching on.
Clock Function:
To set the actual time:
Press the MODE button, the clock function is activated and the hour starts blinking,
•
press the buttons "9" and "10" to set the actual hour.
Press the MODE button again and the minutes start blinking, press the buttons "9" and
•
"10" to set the correct minutes.
Temperature maintenance:
This function serves to keep the temperature of the coffee previously prepared for 30',
•
it is possible to disable it by pressing the button "9".
IN CASE THE COFFEE MAKER IS NOT FILLED WITH WATER AND IN ANO-
MALOUS MANNER, THE BASE INTERRUPTS HEATING AND ALERTS WITH A
CONTINUOUS SEQUENCE OF SHORT SIGNALS.
! ALLOW THE COFFEE MAKER TO COL DOWN COMPLETELY BEFORE TAKING
IT FROM THE HANDLE.
THE BASE IS EQUIPPED WITH AN INNER BATTERY, WHICH MAINTAINS
THE CLOCK AND TIMER SETTING.
IN CASE THE DIGITS ON THE DISPLAY ARE NOT SHOWN CORRECTLY, RE-
PEAT THE STEPS DESCRIBED IN THE PARAGRAPH OF CLOCK FUNCTION.
20
Easy-Timer_IT-UK-FR-D-ES-PT.indd 20
4. Instructions for use
08/06/2018 15:02:49