Publicidad
Idiomas disponibles
Idiomas disponibles
pins enter the board connectors applying pressure slowly to ends
of tube, preferably the outer leads. Snap the printed circuit board
assembly back into housing, reinstall referring to the appropriate
previous installation instructions as necessary.
D. Service.
The Federal factory will service your equipment or provide technical
assistance with any problems that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or re-
pair must be accompanied by a Return Material Authorization. This
R.M.A. can be obtained from a local Distributor or Manufacturer's
Representative.
At this time a brief explanation of the service requested, or the na-
ture of the malfunction, should be provided.
Address all communications and shipments to:
Industrial Systems
2645 Federal Signal Drive • University Park, IL 60484-3167
Tel: 708-534-4756 • Fax: 708-534-4852
Email: elp@federalsignal.com • www.federalsignal-indust.com
E. Replacement Parts.
Description
Strobe Tube
Housing and Lens Assy., Amber
Housing and Lens Assy., Blue
Housing and Lens Assy., Clear
Housing and Lens Assy., Green
Housing and Lens Assy., Red
Part Number
K149128
K8435711-02
K8435711-03
K8435711
K8435711-04
K8435711-01
-3-
Publicidad
