Safety; Installation; Installation Information; Condition Of Installation - Polytropic PAC 16 Manual De Instrucciones

Polytropic

Safety

Although this product conforms to all the requirements of safety, it may still
present residual dangers:
• Electrically controlled parts
• Parts moving with automatic start-up (fan)
• Cutting edges (evaporator)
In order to avoid any accidents, prohibit appliance access to children and pets,
never cover the appliance whilst in operation and never put your fingers, or other
object inside.
Never turn on or run the appliance with any of its panels removed.

Installation

Installation information

The following information given here is not an instruction, but simply meant to
give the user a better understanding of the installation.

Condition of installation

Installation place

The pool heat pump must be installed outside with more than 2 with 3,5m
of the basin according to laws' in force (NF C 15 100).
Install pool heat pump on a flat, horizontal, and stable surface. (Concrete
base would be ideal).
Maintain 1 m of open space in front of the vertical air discharge grids and 3
m on the outlet side of the ventilator.
Reserve enough space to allow access to temperature controller.
Make sure that the discharged air will not be breathed in.

To perfect your installation

Avoid directing the flow of ventilated air towards a sensitive noise zone (room
window for example).
Avoid positioning pool heat pump on a surface that can transmit vibrations to
dwelling.
Try to avoid placing appliance under a tree or exposed to water or mud, which
would be likely to complicate maintenance.
23