First-Things-First (Required Initial Setup); Initial Signal Connections; Digital (Dtv) Rf Antenna Connection; Analog Rf Antenna Connection - Sanyo HT27546 Manual De Instrucciones

FIRST-THINGS-FIRST (REQUIRED INITIAL SETUP)

The signal makes the difference!
1

INITIAL SIGNAL CONNECTIONS

Digital (DTV) RF Antenna Connection

• Connect an RF antenna to the Digital Antenna In
terminal.
The digital tuner in this DTV receives digital signals
from an antenna. Digital signals from a Set-top Box
(STB) are received through the Component In jacks.
This DTV can receive ANY resolution being broad-
cast. However, ALL resolutions are converted to
480i for display.

Analog RF Antenna Connection

• Connect a Cable signal (with or without a cable
box) or RF antenna to the Analog RF input.
The analog tuner in this DTV receives Analog
Antenna signals, Analog Cable signals, or the RF
output from a VCR or cable box.
Analog Cable
VCR Back
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive
DTV Back
cable programs, even with
equipment which is capable of
receiving cable channels, the
consumer must subscribe to
the cable company's service.
NOTES: If you do not have a VCR, connect signal directly
to the 75 ohm terminal (UHF/ VHF/CATV).
The only resolution available with any of these
connections, regardless of the original content, is
standard analog.
I
DTV will select the correct Antenna mode for the type of Analog RF
signal connected automatically.
I
Use "Ana (Analog) Antenna Signal" in the Setup menu to change
the Antenna Mode.
OR
Need help?
DTV Back
Cable
Box
OR
VCR Back
DTV Back
I
If you move the DTV to a new location, press the RESET key twice
after connecting the signal and turning on the DTV.
www.sanyoctv.com
Visit our Web site at
RF
Antenna
RF
Antenna
VCR Back
DTV Back
(Continued on next page.)
1-800-877-5032
or Call
5