Dvdpak2 Settings - RIDGID SEE SNAKE Manual De Operaciones

DVDPak2 Settings

Video Display Settings
If the camera view does not display on the DVDPak2
monitor, perform the following functions to correct the
video display source:
1� Press the Return Button
Menu of the DVDR� Note that depending on the
current menu location, the Return Button
require multiple pushes to allow access to the Main
Menu of the DVDR�
2� Use the Up and Down Arrow Buttons
"Video DVD" and press the Enter Button
3� Use the Up and Down Arrow Buttons
"Video In" and press the Enter Button
Auto Chapter Setting
If the Auto Chapter setting is OFF, the DVDR will start
a new chapter each time the recording is paused� To
turn the Auto Chapter setting OFF, perform the following
functions:
1� Press the Return Button
Menu of the DVDR� Note that depending on the
current menu location, the Return Button
require multiple pushes to allow access to the Main
Menu of the DVDR�
2� Use the Up and Down Arrow Buttons
"Setup" and press the Enter Button
3� Use the Up and Down Arrow Buttons
"Auto Chapter" and press the Enter Button
4� Use the Up and Down Arrow Buttons
"OFF" and press the Enter Button
Alternatively, Auto Chapter can be set to start a new
chapter after every 5 minutes, 10 minutes, or 15 minutes
of recording� Use the Up and Down Arrow Buttons
highlight a time interval within the Auto Chapter Menu
and press the Enter Button
NTSC/PAL Video Setting
The DVDPak2 supports both NTSC and PAL video
settings� The DVDPak2 will not record if the video setting
conflicts with the disc format� Change the video setting
by performing the following functions:
1� Press the Return Button
Menu of the DVDR� Note that depending on the
current menu location, the Return Button
require multiple pushes to allow access to the Main
Menu of the DVDR�
to access the Main
may
to highlight
�
to highlight
�
to access the Main
may
to highlight
�
to highlight
�
to highlight
�
to
�
to access the Main
may
2� Use the Up and Down Arrow Buttons
"Setup" and press the Enter Button
3� Use the Up and Down Arrow Buttons
"Color System" and press the Enter Button
4� Use the Up and Down Arrow Buttons
either PAL or NTSC and press the Enter Button
Units Setting
If connected to a SeeSnake Reel that contains the
CountPlus cable-measurement system, the DVDPak2
will display the distance in either meters or feet� If set
to "Auto" the DVDPak2 will automatically display the
cable-measurement in meters if PAL is set and in feet
if NTSC if set�
To change the cable-measurement units, perform the
following functions:
1� Press the Menu Key
2� Use the Down Arrow Key
press the Select Key
meters, and auto�
3� Press the Menu Key
Color, Contrast, and Brightness Settings
To adjust the color, contrast, or brightness settings as
viewed by the camera on the DVDPak2, perform the
following functions:
1� Press the Menu Key
2� Use the Up and Down Arrow Keys
down and highlight "Color," "Contrast," or "Bright-
ness" and use the Left and Right Arrow Keys
make adjustments� A status bar will appear on the
screen to visually represent the color adjustments�
3� Press the Menu Key
Camera LEDs Brightness Setting
To change the brightness of the LEDs on the camera
head, push the Brightness Key
Right Arrow Keys to adjust the brightness� Press
the Menu Key to close the menu�
Alternatively, push the Brightness Key
to first increase and then decrease the brightness of the
LEDs on the camera head�
Zero-point Setting
If using a SeeSnake Reel equipped with the CountPlus
cable-measurement counter, the cable-measurement
will appear on the monitor of the DVDPak2� To set an
interim zero-point while using the CountPlus, press the
2
to highlight
�
to highlight
�
to highlight
�
to highlight "Unit" and
to toggle between feet,
to close the menu�
on the DVDPak2 Keypad�
to scroll
to close the menu
and use the Left and
multiple times
English - 11
�
to