Technical Data - DITEC UP4E Manual De Instalacion Y Manutencion

1. TECHNICAL DATA

Power supply
Absorption
Motor power
Torque
Capacitor
Opening time
Rod length (max)
Intermittence
Degree of protection
Temperatur
Weight
Electric board
2. REFERENCE TO ILLUSTRATIONS AND ACCESSORIES
2.1 Standard installation references (fig. 1)
ATTENTION: Only use DITEC's safety devices and accessories for installation.
[1] Radio
[2] Flashing light
[3] Key selector
[4] Connect power supply to an omni-pole switch with a contact opening gap of no less that 3 mm (not supplied
by us)
2.2 Geared motor references (fig. 3, 4 and 8)
[7] Fixing base
[8] Container
[9] Rod holder attachment
[10] Key release
[11] Rod
[12] Geared motor
[13] Limit switch group (UP4E-UP4EL)
[14] Encoder group (Only UP4EH)
[15] Transmission lever
[16] Internal mechanical lock
2.3 Accessories
- UP4BC Rectangular (30x100) net span arm 3500 mm
- UP4BL Rectangular (30x100) net span arm 4500 mm
- UP4M Spring Ø 5
- UP4MP Spring Ø 3.5
- UPSN Articulated joint for UP4BC/4BL arms
3. INSTALLATION
Unless otherwise specified, all measurements are expressed in millimetres.
Barrier installation
3.1 Lay a concrete foundation with buried anchoring brackets and the base plate, making sure that it is perfectly
level and smooth. Insert appropriate elements in iron or any other suitable material into the holes of the
anchoring hooks so as to permit fixing to the concrete reinforcement. Route the cable ducts through the
central hole of the plate (fig. 3). Attention: ensure that anchoring is sturdy and stable.
3.2 Fasten the group.
DITEC S.P.A - IP1589 - UP4
UP4E
1.2 A
60 Nm
8 µF
3 s/90°
-15 °C / +50 °C (see NIO for UP4EL-UP4EH)
D61
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
10
UP4EL
230 V~ 50 Hz
100 W
4700 mm
S2=15 min. / S3=30%
IP45
40 kg
LOGICA21
[5] Barrier
[6] Photocells
Lever arm
Top attachment for spring
Spring
Spring adjustment tie rod
Electric board
Screw TE M12x110 galvanized
Upper spring coupling bracket
Self-locking nut galvanized
- UPAM Mobile bearing
- UPGR Aluminium fence L= 2000 mm
- UPC Set of 10 red reflectors
- UP4BAT Barrier battery kit for UP4EH
- UPAF Fixed bearing
UP4EH
1 A
45 Nm
/
1.5 ÷ 4 s/90°
LOGICUH