Cleaning The Wire Guide Liner - Abicor Binzel ROVO VTS Serie Instructivo De Servicio

9 Maintenance and cleaning

9.1 Cleaning the wire guide liner

EN - 16
NOTE
• Please observe the operating instructions of the feed unit manufacturer.
• The maintenance intervals given are approximate values and refer to
single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified
and trained specialists.
• Always wear your personal protective clothing when performing
maintenance and cleaning work.
1 Move robot to the maintenance position.
2 Unscrew the cable assembly on the machine side and bring it into a
stretched position.
3 Unscrew nut (3) of the spiral liner (1) or nut (4) of the PA liner (1) and pull
out spiral liner or PA liner.
 Fig. 9 Shortening the spiral liner on page EN-17
 Fig. 11 Shortening the PA liner on page EN-19
WARNING
Risk of injury
Serious injuries caused by parts swirling around.
• When cleaning the wire guide liner with compressed air, wear suitable
protective clothing, in particular safety goggles.
4 Clean wire feed hose from the machine side connection with compressed
air.
5 Mount spiral liner or PA liner in wire feed hose and secure it with nut.
 See Step 3
VTS torch system