Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN GLIS H
C 1 1 1
1 SAFETY PRECAUTIONS
1 Before connecting the machine to the power source, check
that the voltage shown on the rating plate matches your
electricity supply. Connect the machine to a single-phase
supply through a grounded outlet as required by current
regulations.
2 Do not use extension cables to connect the machine.
3 To avoid any risks, if the power cable is damaged, it must
be replaced by the manufacturer, by an authorized technician
or by a similarly qualified person.
4 The machine is not suitable for outdoor use.
5 The machine must be installed in the upright position.
6 Before cleaning, always disconnect the machine by
removing the plug from the outlet.
7 Always disconnect the machine before removing any of the
panels for cleaning or maintenance work.
8 This machine must not be used by persons unless they
have been trained regarding the safe use of the machine and
understand the risks involved.
9 Only persons who know and have practical experience of
the machine are permitted access to the inner components of
the machine, especially when dealing with issues regarding
safety and hygiene.
10 This machine is intended exclusively for domestic and
similar use.
11 For the machine to operate correctly, ambient temperature
must be between +41° and +89°F.
12 Use the machine to cool the indicated liquids only.
13 Do not introduce dangerous or toxic liquids to the machine.
2 TECHNICAL CHARACTERISTICS
Hopper capacity, approx
Freezing
Cylinder
approx
Dimensions:
width
depth
height
Net weight, approx.
Gross weight, approx.
Hermetic compressor
Air-cooled condenser
Overload protector
Noise level less than 70 dB (A)
IMPORTANT
Electrical characteristics: read the data on the data plate
of the machine; this data plate is located in the lower part
of the front panel, behind the drip tray. The serial num-
bers of the machine (preceded by the symbol #) is indi-
cated on the frame, at the rear of the machine, behind the
condenser cover panel. Always refer to the data shown
on the plate.
The manufacturer reserves the right to amend this manual with-
out notice.
3 INTRODUCTION
Read this instruction booklet carefully in order to familiarize
yourself with all aspects of the machine.
As with all mechanical products, this machine also requires
cleaning and care. In addition, its correct operation may be com-
promised by possible errors made by the operator during the
disassembly and cleaning operations. For this reason, it is im-
portant that the disassembly, cleaning, sanitizing and reassem-
bly procedures - being everyday tasks - are familiar, without any
room for error on the part of the machine user.
The warranty for the C111 is as follows: Five years on major
components including: freezing cylinder, hopper, compressor
and, drive motor; One year on non-wear parts and labor
Every machine includes White Glove
Service. One call does it all – customer
service, technical service, parts or
warranty information, installation,
startup, sales, on-site service dispatch
and much more. Available 24 hours a
day, seven days a week year-round.
Contact White Glove Service at 800-
319-9549
2
gal 1
capacity,
gal 0.5
in
10.2
in
22.4
in
28.7
lbs 106
lbs 121
.
Publicidad
Tabla de contenido
