Notes and operating concept of the eSCHELL software
Operating procedures and tasks
1.3 Operating procedures and tasks
Menu items or functions which the current user is not authorized to use are
not available to them.
eSCHELL navigation for a user with restricted rights is correspondingly
adjusted. The illustrations of the eSCHELL software which are shown in this
manual may therefore differ from your actual screen view.
Depending on your user role and rights in eSCHELL, the following tasks can
be carried out:
– Checking eSCHELL water management server status
– Opening and closing a fitting manually (valve test)
– Retrieving device/fitting data
– Reading information and current operating data
– Viewing configuration and parameter settings
– Querying modules/connected hardware
– Enabling/disabling stagnation flush
– Starting/stopping cleaning stop
– Starting/stopping thermal disinfection
– Enabling/disabling thermal disinfection
– Downloading protocols
– Viewing room layouts
– Changing password
The hygiene functions described here (stagnation flush, thermal disinfection),
along with the cleaning stop, must be configured in a system-specific way
before they can be used.
Configuration of the eSCHELL water management system must only be carried
out by suitably qualified users.
Information about setting up the eSCHELL water management system
and about parametrisation of the hygiene functions can be found in the
"Commissioning and configuration manual".
1.4 User handbook
Path: User handbook
Under the "User handbook" menu item, you can download the system
manual, this operating manual and the notes for configuring the eSCHELL
water management system as pdf files.
WWW ....
You will also find this information on the Internet at:
http://www.schell.eu/eSCHELL
EN
63