Starting/Stopping Cleaning Stop; Starting Cleaning Stop Via Eschell; Starting Cleaning Stop Via A Button In The Sanitary Area; Starting/Stopping Cleaning Stop Via A Switch In The Sanitary Area - Schell 00 500 00 99 Manual De Instrucciones

Operating the eSCHELL water management system

Starting/stopping cleaning stop

2.6 Starting/stopping cleaning stop
Path: Manual operation — Cleaning stop
The fittings in a sanitary room can be taken out of operation for a certain
period of time (flow time) for cleaning purposes. This cleaning stop has to be
started manually.
Depending on the structure of the system, there are three different options
for starting, and if applicable stopping, the cleaningstop:
1. Starting via the eSCHELL software
2. Starting via a button in the sanitary area
3. Starting/stopping via a switch in the sanitary area

2.6.1 Starting cleaning stop via eSCHELL

» Start the cleaning stop of a fitting/group by clicking on the software button
-> the automation starts.
The fittings remain out of operation until the set flow time has expired.

2.6.2 Starting cleaning stop via a button in the sanitary area

» Start the cleaning stop of a fitting/group by pressing the appropriate
button in the sanitary area for a short time.
The fittings remain out of operation until the set flow time has expired.

2.6.3 Starting/stopping cleaning stop via a switch in the sanitary area

» Start the cleaning stop of a fitting/group by pressing the appropriate switch
in the sanitary area.
The fittings remain out of operation as long as the switch remains switched
on. To return the fittings to normal operation, the cleaning stop has to be
switched off manually via the switch. The set flow time is not operative in this
case.
72
Fig 14: Starting/stopping cleaning stop via eSCHELL